Welding And Metal Works Training Courses

These self-study courses on Welding and Metal Works are organized into subject matter areas, each containing learning objectives to help you determine what you should learn along with text and illustrations to help you understand the information.

Description

WELDING AND METAL WORKS TRAINING COURSES

CONTENTS: 7 EBOOKS in PDF File Format

This self-study course is organized into subject matter areas, each containing learning objectives to help you determine what you should learn along with text and illustrations to help you understand the information. The subject matter reflects day-to-day requirements and experiences of personnel in the rating or skill area.

 

 

WELDING AND METAL WORKS TRAINING COURSES

1. METAL WORKING AND WELDING OPERATIONS (PDF Ebook)

This module covers weldable metals and their alloys, arc welding process, gas-welding processes, metalworking machines and tools, equipment repair and welding symbols.

2. WELDING MANUAL (PDF Ebook)

Welding is any metal joining process wherein coalescence is produced by heating the metal to suitable temperatures , with or without the application of pressure and with or without the use of filler metals. Basic welding processes are described and illustrated in this manual. Brazing and soldering, procedures similar to welding, are also covered.

3. FLUX CORED ARC WELDING (PDF Ebook)

This module covers several of the most widely used environmental communications systems within the METOC community. It also describes the software programs and products associated with these systems. The module concludes with a discussion of basic administration procedures.

4. UNDERWATER CUTTING & WELDING MANUAL (PDF Ebook)

This manual is intended to provide information on the use of conventional techniques for cutting and welding metals underwater. It is written for the U.S. Navy diver who specializes in ship salvage and harbor clearance operations. It is not a procedural guide for certifiable welding used in pre-planned underwater ship husbandry applications. Divers who perform underwater cutting and welding must have greater skill and stamina than those doing the same work topside. The success and speed of operations depend upon the conditions under which the diver must work because the underwater environment imposes numerous limitations and restrictions on the operator and equipment. The diver is often restricted to working for only a short time on the bottom, particularly at deeper depths. The use of correct techniques and equipment becomes extremely important in terms of work accomplished per hour. Diving apparel, great depth, adverse currents, low temperature, lack of visibility and unstable footing are all factors which make underwater cutting and welding difficult.

5.  STEELWORKER VOLUME 1 (PDF Ebook)

This training module consists of chapters on the following subjects: Properties and Uses of Metal; Basic Heat Treatment; Introduction to Welding; Gas Cutting; Gas Welding; Soldering, Brazing, Braze Welding, and Wearfacing; Shielded Metal-Arc Welding and Wearfacing; and Gas Shielded-Arc Welding.

6. STEELWORKER VOLUME 2 (PDF Ebook)

This training module consists of chapters on the following subjects: Construction Administration and Support; Sheet Metal and Fiber Glass Duct Layout and Fabrication; Structural Steel and Pipe Layout and Fabrication; Fiber Line; Wire Rope; Rigging and Hoisting; Concrete Construction (Reinforcing Steel); Pre-engineered Buildings, Towers, and Antennas; Pre-engineered Storage Tanks; Pontoons; and SATS matting.

7. PROTECTIVE COATINGS AND PAINTS (PDF Ebook)

This handbook is provided as guidance for personnel wishing to apply architectural paints or protective coatings to any structures fixed in place. It is not for use with ships, aircraft, or automotive vehicles. It is written for general use by both those with much and with little knowledge of the use of paint and coating materials. It contains information on the composition of coatings, their mechanisms of curing, environmental and safety concerns, necessary surface preparation, selection for different substrates and structures, application, inspection, and failure analysis.

 

Download this Amazing Product for FREE! These are Public Domain materials. Use them without restrictions!

DOWNLOAD NOW!


DOWNLOAD SIZE – 65.48 MB (Instant Downloads in ZIP)
          CONTENTS: PDF Handbooks
         SOURCE: Public Domain
LIKE THIS PRODUCT? PLEASE SHARE >>>

Reviews

There are no reviews yet.

Be the first to review “Welding And Metal Works Training Courses”

Your email address will not be published. Required fields are marked *